Picnic Tables – How to make a simple Lazy Susan For Your Picnic Table
Image : http://www.flickr.com
How big is your picnic table? 16 people instead of you? New popular octagonal and hexagonal picnic tables these days can be very large. This is a fantastic idea, because many of the family and friends. And big is beautiful!
There is one small drawback, however, a large table, and this is not achieved, food or beverages at the center or at the other table, without the need to obtain and drag over everything else.
Solution: LazySusan! Chinese is used mainly in the Banqueting Room, where tables are great. It's a simple answer to a frustrating problem.
They can be purchased, but not necessarily identical to the table that, especially if you have a table alone. After a large octagonal picnic table with an octagonal segments in the table above, it would be great to have a matching Lazy Susan.
The following plan for the matchoctagonal picnic table with a table measuring approximately 6'8 "above the parallel sides.
Materials needed for a large octagonal picnic table
Formerly
1 / 2 "plywood 50" * 50 "squares are suitable for outdoor use.
6 * 1 1 / 2 32 "dry pressure-treated pine
2 "* 4 '13" 2 * 4 "dry-treated pine
Nails / Screws
3 "nails girl 32
1 1 / 2 "bolt 128
Turntable Swivel 12 "to 14"
Tools needed
1)Energy Mix Miter Saw.
2) Saws
3) drill a hole saw to open the umbrella.
4) Hammer.
5) Meter. Small plane of the page. Adjustable Square. Pencil.
6) Battery seminar that all the bolts screw in.
Step 1
2 * 4 cut exactly in half of the circular saw. It now get 2 pieces 2 "* 2". If you have an electric plane, smooth blade. Now copy the 8 pieces 19 "Angle of 45 degrees. It is outside the frame.
Make sure that the lower bottom, so as not to see is visible.
Step 2
Arrange items on a flat surface in the shape of an octagon and nail together.
Step 3
Place the frame on the board, plywood and carefully measured corner to corner until you get the frame perfectly "square". If you are absolutely right to draw a direct line of color around the inside frame of plywood. (Note: This is whenThere are differences in the corners of your slides you will need to make some minor adjustments, because what you see).
Step 4
Plywood shift on the bench, and copy exactly along the circular saw. With clean hands flight. Now you have a perfect octagon to fit exactly inside the frame 2 * 2 Put it in a frame on a flat surface, and the rules of conduct between the opposite corners of the plywood
Step 5
Now measureeach vessel, cut an appropriate range of 6 * 1 1 / 2 planes of cutting edges on the slopes. Nothing Neopřete. After completing the complete line up another line, then another, until all the nodes. You have to be cut precisely to make sure that everything fits without interruption.
Step 6
2 nail nails through each part of the external borders of the frame 6 * 1 1 / 2 Now, Lazy Susan. Draw a line between the corners. Take a piece of 6 * 1 1 / 2 is used asguide and source, if the other clubs. Within each chamber in order, as it leads you to a place where you can put the screws.
If you know where it all bolts, plywood bolts secured to the top of Lazy Susan. In this regard, there are no nails or screws to the top of Lazy Susan.
Step 7
Turn him to be in an appropriate manner. Must clearly see the hole where the umbrella goes Wednesday. Use a hole saw that umbrellahole.
Step 8
Rotary screw center and exactly in its place.
Now you have a Lazy Susan transport of food and beverages osemboká effort around large table.
Tags : adjustable table
Related Blogs
Related posts: